Great Plains 7560 Series VII Field Cultivator-Rigid Hitch Parts Manual - Manual (Page 41)

Great Plains Mfg., Inc. Table of Contents ►
Section 5: Shanks
6/15/2004 Series VII 7551-7560 Field Cultivator, Rigid Hitch 560-199P
5-2
Regular Magnum Shank Assembly (S/N 1129CC-)
Ref. Kent No. GP Part No. Part Description Comments
1. FC1200 820-297C Shank, 9/16 x 1 3/4 x 30 Min Draft (shown)
FC0032 820-293C Shank, 9/16 x 1 3/4 x 30 Flat
2. FC0001 552-014D Top Spring Plug
3. FC1109 807-267C Spring, Shank
4. FC0317 812-148C Bottom Spring Plug
5. FC2198 552-050V Spring/Plug Sub Assembly Includes items 2 thru 4
6. FC0331 552-043H Shank Cradle
7. FC1471 552-006D Shank Mount Upright, 4” Tube
8. FC0333 1 x 3/4 x 3 Hardened Bushing
9. UB0032 806-158C U-Bolt, 5/8-11 x 4 x 4 3/4
10. 3110 803-024C Lock Nut, 5/8-11
11. FC0320 802-507C Hex Bolt, 1/2-13 x 1 1/2 Gr.5 Special Thread
12. FC0319 802-485C Carriage Bolt, 3/4-10 x 4 1/8, Gr.5 Special
13. 3612J 803-126C Nylon Jam Nut, 3/4-10
14. FC1169 802-535C Hex Bolt, 1/2-13 x 3 Gr.5, Special
15. 3108 803-019C Lock Nut, 1/2-13
16. 111032 802-055C Hex Bolt, 5/8-11 x 2 Gr.5
17. 3610 803-148C Nylon Lock Nut, 5/8-11
18. 820-294C Sweep, 1/4 x 7"
820-292C Sweep, 1/4 x 7" Hard Faced
820-291C Sweep, 1/4 x 7" Ultra Wing
FC1875 Sweep, 1/4 x 9"
FC1879 Sweep, 1/4 x 9" Hard Faced
FC2042 Sweep, 1/4 x 9" Ultra Wing
FC1876 Sweep, 1/4 x 10"
FC1880 Sweep, 1/4 x 10", Hard Faced
FC2043 Sweep, 1/4 x 10" Ultra Wing
FC1877 Sweep, 1/4 x 11"
FC1881 Sweep, 1/4 x 11", Hard Faced
FC2044 Sweep, 1/4 x 11" Ultra Wing
19. 802-090C Plowbolt, 7/16-14 x 1 3/4, Gr.5
20. 4007 804-204C Flat Washer, 7/16
21. 3607 803-245C Nylon Lock Nut, 7/16-14
22. FC0556 575-860V Sweep 7", w/Bolts Includes items 18 thru 21
575-862V Sweep 7", w/Bolts, Hard Faced Includes items 18 thru 21
575-861V Sweep 7", w/Bolts, Ultra Wing Includes items 18 thru 21
FC0019 570-219V Sweep 9", w/Bolts Includes items 18 thru 21
FC0559 575-809V Sweep 9", w/Bolts, Hard Faced Includes items 18 thru 21
FC1771 575-810V Sweep 9", w/Bolts, Ultra Wing Includes items 18 thru 21
FC0557 575-807V Sweep 10", w/Bolts Includes items 18 thru 21
FC0560 575-767V Sweep 10", w/Bolts, Hard Faced Includes items 18 thru 21
FC1772 575-811V Sweep 10", w/Bolts, Ultra Wing Includes items 18 thru 21
FC0558 575-808V Sweep 11", w/Bolts Includes items 18 thru 21
FC0561 575-804V Sweep 11", w/Bolts, Hard Faced Includes items 18 thru 21
FC1773 575-812V Sweep 11", w/Bolts, Ultra Wing Includes items 18 thru 21
Heavy-Duty Magnum Shank Assembly (S/N 1130CC+)
Ref. Kent No. GP Part No. Part Description
Comments
1. FC1576 820-296C Shank, 5/8 x 1 3/4 x 30 Min Draft, Heavy
820-295C Shank, 5/8 x 1 3/4 x 30 Flat
820-351C Shank, 5/8 x 1 3/4 x 30 MD Offset 2”
2. FC1970 552-030D 7/16x1.5 ID Top Spring Plug
3. 807-149C Spring Ext 2.42OD .438W 9.69 Long
4. FC1971 812-143C 7/16x1.5 ID Bottom Spring Plug
5. 552-057V Heavy Spring/Plug Sub Assembly Includes items 2 thru 4
All other items same as above
2/01/2005 5/15/2007
Legend: = 1st revision; = 2nd revision, = 3rd revision; use up existing stock;
⊗ not interchangeable; ⊗
Revision 2 is not interchangeable with 1