Great Plains 3PYP Parts Manual - Manual (Page 43)

Revision Comments Part Description Part No. Ref.
Image No. dwg25052
TOOLBAR CTR W/SEED SUPPORT WLD 401-317H 1.
LINK ARM LOWER WLDMT 401-311H 2.
STACKING WING WLDMT LEFT 401-295H 3.
STACKING WING ASM RIGHT 401-296H 3.
ARM UPPER LINK WLDMT LFT 401-297H 4.
ARM UPPER LINK WELD RT 401-301H 4.
CYL LOCK CHANNEL 1 1/2X17 3/4 196-292H 5.
FLEX ARM WELDMENT 11.5 DEG 401-271H 6.
Refer to "Hydraulic Cylinder 810-592C
(5 x 29.5 x 1.50 Rod)" for breakdown
CYL 5X29.5X1.5 ROD 810-592C 7.
CYL PIN NR 1.25X3.63USBX3.13CH 196-392H 8.
LINK UPPER LIFT ARM WLDMT 401-314H 9.
NUT HEX 1 1/2-6 PLT 803-073C 10.
PIN CLEVIS 1 1/4 X 3 3/8 GR5 805-196C 11.
GREASE ZERK 1/4-28 X 90-DEG 800-073C 12.
GREASE ZERK STRAIGHT 1/4-28 800-001C 13.
PIN 1 1/4 X 11 1/4 W/HOLE 401-867D 14.
PIN 1 3/4 X 19 5/8 W/HOLE 401-855D 15.
PIN 1 1/2 X 10.75 401-868D 16.
PIN ROLL 3/8 X 2 1/2 PLT 805-255C 17.
PIN ROLL 1/4 X 2 1/2 PLT 805-117C 18.
PIN LINCH 5/16 X 2 11/32 805-158C 19.
HHCS 3/8-16X2 1/2 GR5 802-114C 20.
NUT LOCK 3/8-16 NYLON INSERT 803-078C 21.
BENT PIN 3/8 X 2 1/2 USE W/COT 805-152C 22.
BUSHING 1 1/2 X 1 1/4 X 1 1/2 890-930C 23.
BUSHING 2 X 1 3/4 X 2 890-933C 24.
HHCS 1/2-13X3 1/4 GR5 802-099C 25.
NUT LOCK 1/2-13 PLT 803-019C 26.
GREASE ZERK 1/4-28 X 45-DEG 800-058C 27.
BUSHING SPINDLE 1 1/2X1 1/4X1 890-011C 28.
PAD STOP BLOCK 401-964D 29.
HHCS 1/2-13x1 3/4 GR5 802-082C 30.
NUT HEX 1/2-13 PLT 803-020C 31.
WASHER FLAT 5/8 USS PLT 804-019C 32.
WASHER FLAT 1 1/4 SAE PLT 804-039C 33.
11/21/13 - 43 - 401-312P
Table of Contents Part Number Index
Frame
Wing To Frame
(Applies to 3PYP only)