Great Plains 3PYP Parts Manual - Manual (Page 263)

Revision Comments Part Description Part No. Ref.
Image No. dwg25416
Refer to page "Fasse Switch Box (S/N
1024S-)" for breakdown
SWITCH CAB 833-437C 1.
HARNESS TRACTOR POSITION 833-438C 2.
Refer to page "Linear Steering Sensor
(401-451S)" for breakdown
SENSOR LIN 401-541S 3.
FASSE CAP DUST 255-213 4.
FASSE HRN ASSY 12CON 18GA 5W/P 313-007 5.
Refer to page "Steering Control Valve
(810-600C)" for breakdown
VALVE STEERING CONTROL 810-600C 6.
SENSOR DIRECTION 833-436C 7.
FASSE STR RLF H/F 70P ECU-MS 300-625 8.
Used on JD base end (See 1A) BRKT SENSOR JD FIXED 411-575D 9.
Used on JD suspension base end
(See 2A)
BRKT SENSOR JD SUSPEN WHL 411-578D 9.
Used on Case base end (See 3A) BRKT SENSOR BASE TRACTOR 411-579D 9.
Used on JD rod end (See 1B) BRKT SENSOR JD WHL 411-576D 10.
Used on JD suspension rod end (See
2B)
BRKT SENSOR JD SUSPEN FIXED 411-577D 10.
Used on Case rod end (See 3B) BRKT SENSOR ROD END CASE MX 411-580D 10.
SENSOR LIN 8" PWM 833-498C 11.
COLLAR 411-581D 12.
YOKE 411-582D 13.
FASSE HRN ASSY GOO187 ECU-MS 300-627 14.
HHCS 1/4-20X1 1/2 GR5 802-167C 15.
WASHER FLAT 1/4 SAE PLT 804-007C 16.
HHCS 1/4-20X2 1/2 GR5 802-097C 17.
NUT HEX NYLOCK 1/4-20 803-255C 18.
NUT HEX NYLOCK 3/8-24 PLT 803-305C 19.
PIN HINGE THD 5/16 X 9 5/8 411-469D 20.
HINGE ECU MNT FIXED 411-466D 21.
WASHER FLAT 5/16 SAE PLT 804-036C 22.
NUT HEX NYLOCK 5/16-18 PLT 803-084C 23.
NUT HEX 1/4-20 PLT 803-006C 24.
HHCS 1/4-20X1 1/4 GR5 802-224C 25.
BRKT ECU MNT HINGED 411-467D 26.
WASHER LOCK SPRING 1/4 PLT 804-006C 27.
11/21/13 - 263 - 401-312P
Table of Contents Part Number Index
Options
Steering Controls (S/N 1024S-)
(Applies to 3PYP only)