Great Plains 3S-3000F Operator Manual v2 - Manual (Page 61)

59
Section 6 Options
11/9/07 3S-3000 Three-Section Folding Drill 195-110M-A
Great Plains Mfg., Inc.
3S-3000 Flat Folding Marker
The 3S-3000 flat fold marker is a hydraulically operated
ground marking disk unit which leaves a center line mark for
the tractor follow, allowing you to keep the correct row spac-
ing from one drill pass to the next. This marker option is sold
as a single marker for mounting on the left end on your drill,
or a dual markers for mounting on both ends of your drill. The
dual markers are hydraulically plumbed together with a se-
quence valve to allow alternate activation between the two
markers from a single hydraulic circuit. Both marker options
come with a double selector valve which allows you to tie the
marker hydraulic circuit in with the fold hydraulic circuit so
additional tractor hydraulic supply valves are not necessary.
For more information refer to:
•
Marker Operation in the “Operating Instructions” sec-
tion starting on page 30
Marker Bundles
113-552A 30' 3-Section Single LH Flat Fold Marker
113-553A 30' 3-Section Dual Flat Fold Marker
Section 6
Options
00 Series Seed Lok Firming Wheel
The optional spring loaded Seed-Lok TM Firming Wheel
presses the seed directly into the bottom of the soil V-groove
cut by the disks to assure the best contact between soil and
seed. Firming each seed into the bottom of the V-groove re-
sults in even emergence, since seeds are planted and firmed
at the same depth. This option bolts directly to the scraper
mount of your standard drill openers.
Seed Lok Bundle
122-193K Solid Stand Removable 5” Seed Lok Assembly
122-266K Solid Stand Removable 5” Seed Lok Assembly
15638
12677