Great Plains 8-10m Press Range SN 12653-12671 Operator Manual User Manual
Page 7
7
8-10m Press Range
Operating Instructions
Table of Contents
4.9
Depth Control ...................................................................................................... 26
4.10
Adjusting Tine Depth (UniPress and CultiPress models only) ............................... 26
4.10.1 Placing Tines Deeper into Work .......................................................................... 26
4.10.2 Lifting the Tines Out of Work ................................................................................ 26
4.11
Out-Rigger Wheel Adjustment.............................................................................. 27
4.12
Levelling Boards (if fitted) .................................................................................... 27
4.13
Transport wheel adjustment ................................................................................. 27
4.13.1 Adjusting the Transport Wheel Height ................................................................. 27
4.14
Adjusting Disc Angle (X-Press model only) ......................................................... 28
4.15
Work Instructions ................................................................................................. 28
4.16
Parking the machine ........................................................................................... 29
4.17
Checks ............................................................................................................... 29
4.18
Machine Starting Settings.................................................................................... 30
5.
Servicing and Maintenance ......................................................... 35
5.1
Servicing ............................................................................................................. 35
5.2
Cleaning ............................................................................................................. 35
5.3
Disc Hub Maintenance ........................................................................................ 35
5.3.1 Bearing Seals ..................................................................................................... 36
5.3.2 Reassembly ........................................................................................................ 36
5.4
Pro-Active Tine Points ......................................................................................... 36
5.5
Double Disc Axles ............................................................................................... 36
5.6
Wing Pitch .......................................................................................................... 36
5.7
Hydraulics ........................................................................................................... 37
5.9
Operator Support ................................................................................................ 37
5.8
Preparation for Storage ....................................................................................... 37
5.10
Maintenance Intervals .......................................................................................... 37
5.11
Maintenance Overview ........................................................................................ 38
5.12
Overview of Lubricating Points ............................................................................ 39
5.13
Lubricating the Machine ...................................................................................... 40
5.14
Handling of Lubricants ......................................................................................... 40
5.15
Lubricants & Hydraulic Oil ................................................................................... 41
6.
Faults and Remedies ................................................................... 42
7.
Parts and Assembly ..................................................................... 45