Great Plains 6548 Series VII Field Cultivator-Rigid Hitch Operator Manual - Manual (Page 9)

Great Plains Mfg., Inc. Table of Contents ►
Important Safety Information
11/13/2003 Series VII 6330-6548 Field Cultivator, Rigid Hitch 560-203M
7
Safety Decals
Your implement comes equipped with all safety
decals in place. They were designed to help you
safely operate your implement.
• Read and follow decal directions.
• Keep all safety decals clean and legible.
• Replace all damaged or missing decals. Order
new decals from your Great Plains dealer.
Refer to this section for proper placement.
• When ordering new parts or components, also
request corresponding safety decals.
• To install new decals:
1. Clean the area on which the decal is to be
placed.
2. Peel backing from decal. Press firmly on
surface, being careful not to cause air
bubbles under decal.
Slow Moving Vehicle Emblem
Quantity 1
Reflector – Amber
838-615C
Quantity 6: Two on light bracket and two on
center brace bar. Two on rear of finishing
attachment (not shown), visible from side
while folded for transport.