Great Plains 6548 Series VII Field Cultivator-Rigid Hitch Operator Manual User Manual
Operator’s manual, Field cultivator, rigid hitch (constant level)
©Copyright 2003 Printed 11/11/2008
560-203M
Operator’s Manual
Series VII 6330, 6332, 6537, 6539, 6541, 6544, 6546 & 6548
Field Cultivator, Rigid Hitch (Constant Level)
Read the operator’s manual entirely. When you see this symbol, the subsequent
instructions and warnings are serious - follow without exception. Your life and the
lives of others depend on it.
Cover illustration may show optional equipment not supplied with standard unit.
!
This manual is related to the following products:
- 6546 Series VII Field Cultivator-Rigid Hitch Operator Manual 6544 Series VII Field Cultivator-Rigid Hitch Operator Manual 6541 Series VII Field Cultivator-Rigid Hitch Operator Manual 6539 Series VII Field Cultivator-Rigid Hitch Operator Manual 6537 Series VII Field Cultivator-Rigid Hitch Operator Manual 6332 Series VII Field Cultivator-Rigid Hitch Operator Manual 6330 Series VII Field Cultivator-Rigid Hitch Operator Manual
Table of contents
Document Outline
- Field Cultivator, Rigid Hitch
- Operator’s Manual
- Table of Contents
- Important Safety Information
- Introduction
- Section 1: Assembly
- Center Torque Tube & Walking Beam Assembly
- Inside Wing and Wheel Arm Assembly
- Brace Bar, Wing Brace & Rocker/Fold Bracket Assembly
- Outside Wing Assembly
- Connecting Outside Wing and Wing Brace Assembly
- Center Truss, Hitch and Strut Assembly
- Hitch Tongue, Side Plate and Level Bar Assembly
- Center Lift Cylinder, Bolt On Stubs and Hydraulic Valves Assembly
- Fold Cylinders, Rocker Arm and 3” Rollers Assembly
- Center Wing Stop and Outside Wing Stop Assembly
- Gauge Wheel Assembly
- Completing Setup
- Section 2: Hydraulics
- Section 4: Shank Placement
- 6330 Shank Layout
- 6332 Shank Layout
- 6537 Single Fold Shank Layout
- 6537 Double Fold Shank Layout
- 6539 Single Fold Shank Layout
- 6539 Double Fold Shank Layout
- 6541 Single Fold Shank Layout
- 6541 Double Fold Shank Layout
- 6544 Single Fold Shank Layout
- 6544 Double Fold Shank Layout
- 6546 Shank Layout
- 6548 Shank Layout
- Section 5: Operating and Maintenance
- Section 6: Specifications and Capacities
- Appendix