Great Plains 2020P Operator Manual - Manual (Page 72)

2010P and 2020P
118-740M 4/23/2010
70
Operating Instructions
Drive Operational Requirements:
Hydraulic System:
Maximum Required Flow:
Minimum Hydraulic Pressure:
Maximum Hydraulic Pressure:
Electrical System:
Voltage:
Amperage:
Tractor Hookup
Hydraulics:
1. Connect pressure hose (P) to retraction outlet.
2. Connect motor return hose (T) to motor return port (if available) or to extention outlet.
3. Set flow rate at maximum.
4. If tractor is equipped with electro-hydraulic valves set timer to “constant” flow.
Electrical:
1. Power can be connected in three different manners:
a. Power port adaptor (PN 19676)
Closed center, pressure compensated or
load sensed systems only
Drive will not operate on open-centered hy-
draulic systems
2250 psi
3000 psi
8.5 gpm
10.75 gpm
15 - 24’
30’
12 volt DC
4 amperes