Great Plains 2N-3020 Operator Manual - Manual (Page 43)

41
Section 6 Options
2/28/08 2N-2420 and 2N-3020 Two-Section Folding No-Till Drill 196-164M-A
Great Plains Mfg., Inc.
Shaft Monitors
The optional 2-channel shaft monitor is an electronic mon-
itoring system to detect when seed cup shafts stop turn-
ing. If a shaft stops for more than 20 seconds, an alarm
sounds and a warning light designates the failed shaft.
For information on how to operate the shaft monitors, refer
to Shaft Monitor Operation, “Operating Instructions,”
page 18.
To order shaft monitors, contact your Great Plains dealer.
Monitor Bundle Part Number
Shaft Monitor Package 197-106A
13178
Electric Clutches
A mechanical jaw clutch turns seeding on and off as the
drill is raised and lowered in the field. Optional electric
clutches allow you to turn seeding off while the drill is low-
ered. A clutch for each drive shaft allows you to control
each drill box independently.
For information on how to operate the clutches, refer to
Electric Clutch Operation, “Operating Instructions,”
page 17.
To order the electric clutch option, contact your Great
Plains dealer.
Electric Clutch Package Part Number
Electric Clutch Package, Field 197-104A
13933
Rear Mount Boom
The drill boom mounts under the walkboard and allows
you to apply liquid herbicides or pesticides behind the drill
press wheels. The kit includes mounting hardware, boom
plumbing and nozzle bodies for 20-inch spacing. Tractor
tanks, pump, plumbing to the drill and nozzles are re-
quired.
To order the boom, contact your Great Plains dealer.
Package Part Number
116-195A 24-Foot Two-Section No-Till Spray Boom
116-194A 30-Foot Two Section No-Till Spray Boom 17996