Great Plains 2N-3020 Operator Manual - Manual (Page 41)

39
Section 6 Options
2/28/08 2N-2420 and 2N-3020 Two-Section Folding No-Till Drill 196-164M-A
Great Plains Mfg., Inc.
Section 6
Options
Coulter Tines
The coulters on your implement can be equipped with op-
tional trash tines. Under most conditions, these tines will
not be needed. In high-residue fields, the tines will help
guide the residue under the coulters and openers to pre-
vent plugging.
To order tines, contact your Great Plains dealer. Refer to
the table below for the correct tine package for your drill.
Drill Size Coulter Tine Part Number
24-ft., 7 1/2-in. Rows 149-717A
24-ft., 8-in. Rows 149-718A
24-ft., 10-in. Rows 149-719A
30-ft., 7 1/2-in. Rows 149-714A
30-ft., 8-in. Rows 149-715A
30-ft., 10-in. Rows 149-716A
Weight Brackets
If more weight is required for coulters to penetrate soil,
weight bracket kits are available. Each kit contains two
weight brackets–one for each box frame. The weight brack-
ets hold several styles of suitcase weights commonly avail-
able through tractor dealers, including John Deere, CASE,
International Harvester and CASE-IH.
For information on how additional weights will affect seed-
ing depth, refer to Weights, “Adjustments,” page 19.
To order weight brackets, contact your Great Plains dealer.
Refer to the table below for the correct brackets for your
drill.
Drill Size Weight Bracket Kit Part Number
24-ft. Drills 197-112A
30-ft. Drills 197-110A
13011
12924