Great Plains CP1000 Predelivery Manual - Manual (Page 4)

1
Introduction
10/16/08 CP1000 Three-Meter Drill and Hitch 148-358Q
Great Plains Mfg., Inc.
Introduction
manual before assembling the machine. As a reference,
keep the operator’s manual on hand while assembling.
The information in this manual is current at printing. Some
parts may change to assure top performance.
Definitions
The following terms are used throughout this manual.
Right and left as used in this manual are determined by
facing the direction the machine will travel while in use un-
less otherwise stated.
IMPORTANT: A crucial point of information about the
preceding topic. For safe and correct operation, read
and follow the directions provided before continuing.
NOTE: Useful information about the preceding topic.
Assembly and Setup Assistance
To order additional copies of predelivery instructions or
operator’s and parts manuals, write to the following ad-
dress. Include model numbers in all correspondence.
If you do not understand any part of this manual or have
other assembly or setup questions, assistance is avail-
able. Contact
Product Support
Great Plains Mfg. Inc., Service Department
P.O. Box 5060
Salina, KS 67402-5060
Great Plains Manufacturing wants you to be satisfied with
any new machine delivered by the Great Plains Trucking
network. To ease the assembly task and produce a prop-
erly working machine, read this entire manual before as-
sembling or setting up new equipment.
Description of Unit
The CP1000 is a pull-type seeding implement. The imple-
ment consists of a three-point drill mounted on a centre-
pivot hitch. The hitch and drill are integrally connected.
No-till coulters are mounted on the hitch to zone-till strips
for seed furrows. Straight-arm openers on the drill prepare
seedbeds and place the seed. The pivoting action of the
hitch helps drill openers track the coulters. A contract-
drive tire on the drill powers seeding off a hitch tire. The
tongue cylinder controls coulter depth and transport cylin-
ders raise the drill for turns and transport.
Intended Usage
Use this implement for seeding production-agriculture
crops only. Do not modify implement for use with attach-
ments other than those specified by Great Plains. Use
implement in no or minimum tillage.
Using This Manual
This manual was written to help you assemble and pre-
pare the new machine for the customer. The manual in-
cludes instructions for assembly and setup. Read this
manual and follow the recommendations for safe, efficient
and proper assembly and setup.
An operator’s manual is also provided with the new ma-
chine. Read and understand “Important Safety Informa-
tion” and “Operating Instructions” in the operator’s