Great Plains Simba Single Press Operator Manual - Manual (Page 11)

11 Simba Single Press
609-060M-ENG
2013-01-25
1.3 Operational Safety
The machine is to be put in operation only
after instruction has been provided by an
employee of the authorised dealer or an
employee of Great Plains. The “Machine
Registration” form is to be completed and
returned to your dealer.
All protective and safety equipment, such
as removable protective equipment, must
be in place and functioning reliably before
the machine is put in use.
Check screws and bolts regularly
for tightness and retighten if
necessary.
In the event of malfunctions,
stop and secure the machine
immediately.
Ensure that any faults are remedied
immediately.
1.4 No Liability for
Consequential Damage
The Simba Single Press has been
manufactured with great care. However,
problems may still occur when it is used for
the intended purpose. These may include:
• Worn wearing parts.
• Damage caused by external factors.
• Incorrect driving speeds.
• Incorrect setting of the unit (incorrect
attachment, non-adherence to the Setting
instructions).
It is crucial to always check
your machine before and during
operation for correct operation and
adequate application accuracy.
Compensation claims for damage which has
not occurred to the machine is excluded.
This includes any consequential damage
resulting from incorrect operation.
1.2 Use for the Intended
Purpose
The Great Plains Simba Single Press is
built using the latest technology and in
accordance with the relevant recognised
safety regulations. However, risks of
injury for the operator or third parties and
impairment of the machine or other tangible
assets can arise during use.
The machine is only to be operated when
in a technically perfect condition and for the
intended purpose, taking into consideration
safety and risks and following the Operating
Instructions. In particular, faults that can
impair safety are to be remedied immediately.
Original parts and accessories from Great
Plains have been specially designed for
this machine. Spare parts and accessories
not supplied by us have not been tested
or authorised. Installation or use of non-
original Great Plains products may have
a detrimental effect on specific design
features of the machine and affect the safety
of machine operators and the machine
itself. Great Plains will accept no liability
for damage resulting from the use of non-
original parts or accessories .
The Great Plains Simba Single Press is
designed solely as a cultivation implement.
Use for any other purpose, e.g., as a means
of transport, will be deemed to be improper
use. Great Plains will accept no liability for
damage resulting from improper use. The
risk will be borne solely by the operator.
Use of the Simba Single Press behind high
power tractors (in excess of 40% above the
maximum recommended) can lead to high
loads and stresses which can cause long
term structural damage to the chassis and
key components. Such overloading can
compromise safety and is to be avoided.
1. Safety Data