beautypg.com

9 work instructions, 11 checks, 10 parking the machine – Great Plains SL600 Operator Manual User Manual

Page 28

background image

28 Simba SL

603-215M-ENG

2012-12-21

4.9 Work Instructions

Driving speed

The Simba SL can be driven at speeds of

up to 12 km/h.

This depends on the field conditions (type

of soil, surface trash, etc.).

Drive more slowly if the conditions are

difficult or a firmer finish is required.

Turning:

Before turning, the machine should

be eased fully out of work onto

the transport wheels while moving

forward. Likewise, it should eased

back into work once the turn has

been completed. Do not attempt to

turn the machine on the roll.

4.11 Checks

The working quality depends on the

adjustments and checks made prior to and

during work, as well as on regular servicing

and maintenance of the machine.

Before beginning work it is therefore

important to carry out any necessary

servicing and to lubricate the machine as

required.

Checks prior to, and during

work:

• Is the machine correctly hitched up and the

coupling device locked?

• Have the hydraulic lines been connected

according to the colour coding?

• Is the machine in a level operating position

and the working depth set correctly?

Working Elements

• Are the discs and other cultivation tools in

a serviceable condition?

• Are the scrapers still operable, so that the

rolls do not jam?

4. Adjustment / Operation

4.10 Parking the machine

In order to avoid damage as a result of

moisture, the machine should be parked, if

possible, indoors or under cover.

When manoeuvring the machine,

pay attention to your surroundings.

Ensure that nobody is in the

manoeuvring area (watch for

children!).

• Park the machine on level and solid ground.

• Fit the wheel chocks.

• Raise the machine and lower the parking

stand.

• Lower the machine to the ground, ensuring

that it is stable.

When parking with the machine

unfolded, ensure that no load is

carried by the Spring Reset tines.

This can lead to breakage of the

points.

• Disengage from the linkage and drive

forward slowly until the tractor is clear.

• Switch off the tractor.

• Disconnect hydraulic lines from the tractor.

This manual is related to the following products: