Great Plains 3P-FF900 Predelivery Manual User Manual
Page 2

11/09/2006
500-643Q
©
Copyright 2006 All rights Reserved
Great Plains Manufacturing, Inc. provides this publication “as is” without warranty of any kind, either expressed or implied. While every precaution has been taken in the prepa-
ration of this manual, Great Plains Manufacturing, Inc. assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of
the information contained herein. Great Plains Manufacturing, Inc. reserves the right to revise and improve its products as it sees fit. This publication describes the state of this
product at the time of its publication, and may not reflect the product in the future.
Great Plains Manufacturing, Incorporated Trademarks
The following are trademarks of Great Plains Mfg., Inc.: Application Systems, Ausherman, Land Pride, Great Plains
All other brands and product names are trademarks or registered trademarks of their respective holders.
Printed in the United States of America.
Table of Contents
Important Safety Information................................... 1
Introduction............................................................... 6
Description of Unit ................................................ 6
Intended Usage ............................................. 6
Models Covered............................................. 6
Using This Manual................................................ 6
Definitions ...................................................... 6
Assembly and Setup Assistance .......................... 6
Product Support ............................................. 6
Assembly................................................................... 7
Tools Required ..................................................... 7
Pre-Assembly Checklist ....................................... 7
Unload Sprayer from Truck .................................. 8
Remove Shipping Straps...................................... 8
Marker Tank ......................................................... 8
Boom Lock Cable ................................................. 9
Outer Jump Nozzle............................................... 9
Preparation and Setup ........................................... 10
Before You Start................................................. 10
Hitching Tractor to Sprayer ................................ 10
Predelivery ......................................................... 12
Hydraulic Drive Pumps ................................ 12
Ace Pump Flow Limiter................................ 13
To Install Pump Flow Limiter................. 13
Specifications and Capacities............................... 14
Appendix ................................................................. 15
Torque Values Chart .......................................... 15