Great Plains 3P1006NT Assembly Instructions - Manual (Page 2)

2 Great Plains Manufacturing, Inc. Front Page Part Lists Caster Wheel Update
124-049M Front Page Part Lists 12/22/2009
Caster Wheel Update
Installation
Refer to Figure 2
These instructions are for both caster wheels.
1. Remove existing straight grease zerk from lift assist
arm.
2. Replace with 90 degree zerk from kit:
800-073C GREASE ZERK 1/4-28 X 90-DEG
3. Using grease gun apply one or two shots of grease
to zerk.
4. Select one each:
266-012D PLATE RND 3/16" THK 1 7/8"
807-143C SPRING COMP 1.88OD X .362W
266-020D UHMW RND 2.0 DIA X 2.0 LONG
Install in bottom of caster disk weldmount
124-048H CASTER DISC MOUNT.
5. Leaving room for grease zerk maintenance, rotate
assembly to the left and install on lift assist arm.
Select two:
806-217C U-BOLT ROUND 1/2-13 X 3 9/3
Select four washers and nuts:
804-015C WASHER LOCK SPRING 1/2 PLT
803-020C NUT HEX 1/2-13 PLT
6. Select one bolt and nut:
803-048C NUT HEX JAM 3/4-10 PLT
802-067C HHCS 3/4-10X4 GR5 FTHD
Install in top of caster disk mount.
7. Repeat steps 1 through 7 for opposite caster wheel.
Figure 2
Caster Disk Mount
29968
13
17
18
21
16
14
15
19
20
12
20
15
13
21
14
12
20
19
17
18
16