Great Plains 3P1006NT Assembly Instructions User Manual
General information, Related documents, Tools required
Great Plains Manufacturing, Inc.
1
© Copyright 2009
Printed 12/22/2009
124-049M
Caster Wheel Update Kit
3P806NT and 3P1006NT Drills
General Information
These instructions explain how to install a Caster Wheel
Update Kit. One kit updates an entire drill:
Related Documents
Have the Operator and Parts Manuals at hand.
Tools Required
• basic hand tools
• grease and grease gun
Work Location
1.
Move the implement to a location with:
Prepare Drill
2.
Block the tires and install the parking jack.
3.
Disconnect all hydraulic and electrical conections at
the hitch. Secure hoses and cables to prevent
ground contact.
Notations and Conventions
Call-Outs
Used with:
• 3P806NT (S/N A1034V-)
• 3P1006NT (S/N A1047-)
When you see this symbol, the subsequent instructions
and warnings are serious - follow without exception.
Your life and the lives of others depend on it!
Kit
Kit Description
124-047A
Caster Wheel Update Kit
151-143M
Operator, 3P806NT
151-143P
Parts, 3P806NT
151-144M
Operator, 3P1006NT
151-144P
Parts, 3P1006NT
• flat, smooth surface
• adequate illumination
Figure 1
Caster Wheel Update Kit
29969
High Pressure Fluid Hazard:
Releive pressure from all lines before
working on hydraulic connections. Wear
eye protection and gloves when opening hydraulic
connections. Open connections slowly. Use a piece of
paper or cardboard, NOT BODY PARTS, to check for leaks. Escaping
fluid under pressure can have sufficient pressure to penetrate the skin
causing serious injury. If an accident occurs, seek immediate medical
assistance from a physician familiar with this type of injury.
“Left” and “Right” are facing in the
direction of machine travel. An orienta-
tion rose in the line art illustrations
shows the directions of Left, Right,
Front, Back, Up, Down.
U
D
L
R
B
F
to
Single-digit callouts identify components in
the currently referenced Figure. These num-
bers may be reused for different items from
page to page.
to
Two-digit callouts in the range 11 to 21 refer-
ence new parts from the list on page 4.
This callout references an existing part from
page 4.
1
9