Great Plains 1006 Assembly Instructions User Manual

Page 2

116-280M

5/5/2006

Great Plains Mfg., Inc.

Harrow Option

Setting the Angle

Refer to Figure 2

Adjust the angle of the tines to match your needs.
Start by loosening the 1/2" x 1 3/8" x 2 3/4" round
bottom U-bolts (1 and 2) which hold the tine tubes
to the frame and frame to the harrow arms.

Rotate the tubes (3) so the tine bolts (4) are
against the tines (5) and the tines are at the de-
sired angle and tighten the tine bar U-bolts (2).

Rotate the frame assembly to the desired angle
and tighten the U-bolts (1) which connect the
frame assembly to the arms.

NOTE: Figure 2 shows one harrow setting that has
proven successful in no till and minimum till condi-
tions. Your field conditions may differ because of mois-
ture, soil types and levels of trash. Some adjustment
of the tine tubes and/or harrow frames may be re-
quired.

Figure 2

Suggested Spring Angles

(Arrow shows direction of travel)

116-278A 706 Harrow Assembly

Your kit includes:

116-068K

14’ SPRING HARROW ASSEMBLY

116-155K

12’EWNT HARROW ARM ASSEMBLY

116-280M

706/1006 HARROW MANUAL

Qty.

Part No.

Part Description

116-279A 1006 Harrow Assembly

Your kit includes:

116-070K

20’ SPRING HARROW ASSEMBLY