Great Plains 2600-2S Assembly Instructions - Manual (Page 3)

3 3/31/04 2600-2S Small Seeds Option 133-170M
Great Plains Mfg., Inc.
Assembly
■
Seed Tube Assembly
Note: For drills without a fertilizer kit use seed tube P/N
123-939H and use the following instructions.
Refer to Figure 4
1. Insert the seed tube (1) into the hole on the top of the open-
er. Add reinforcement ring (7) and secure in place with a
number 10-16 x 1/2” screw (2).
2. Slide a hose clamp (4) over the hose (3). Slide the end of the
hose over the seed tube and secure it in place with the hose
clamp.
3. Slide a hose clamp (4) over the other end of the hose and
slide the hose over the seed outlet which corresponds with
the appropriate opener. Secure hose in place with the hose
clamp. Repeat the above steps to install the rest of the seed
tubes and hoses.
Note: For drills with a fertilizer kit use seed tube P/N 133-
128H and use the following instructions.
Refer to Figure 4
4. Set the side delivery tube (5) down over the top of the open-
er directly in front of the fertilizer tube. Line up the holes with
the holes in the opener and insert the 3/8” x 3 5/8” bolt and
secure bolt with a 3/8” lock nut flange.
5. Slide a hose clamp (4) over the hose (3). Slide the end of the
hose over the seed tube and secure it in place with the hose
clamp.
6. Slide a hose clamp (4) over the other end of the hose and
slide the hose over the seed outlet which corresponds with
the appropriate opener. Secure hose in place with the hose
clamp. Repeat the above steps to install the rest of the seed
tubes and hoses.
Figure 4
Seed Tube and Hose
20101