Great Plains 2600-2S Assembly Instructions - Manual

1
Installation Instructions
Great Plains Mfg., Inc.
© Copyright 2001 Printed
Used with:
•
133-170M
2600-2S
Small Seeds Option
2600-2S
General Information
These instructions explain how to install the small-seeds attach-
ment. The small-seeds attachment delivers the smallest seeds
evenly and gently. The attachment holds 0.24 bushels per foot.
These instructions apply to:
• 133-164A . . . . . . . . . . . . . . . . . . . . . . . 2600 Small Seeds 6"
• 133-165A . . . . . . . . . . . . . . . . . . . . 2600 Small Seeds 7 1/2"
• 133-166A . . . . . . . . . . . . . . . . . . . . . . 2600 Small Seeds 10"
• 133-167A . . . . . . . . . . . . . . . . . . . . . . 2600F Small Seeds 6"
• 133-168A . . . . . . . . . . . . . . . . . . . 2600F Small Seeds 7 1/2"
• 133-169A . . . . . . . . . . . . . . . . . . . . . 2600F Small Seeds 10"
Manual Update
Refer to the drill operator’s manual for detailed information on op-
erating, adjusting, troubleshooting and maintaining the small-
seeds attachment safely. Refer to the parts manual for part iden-
tification.
• 2600-2S Drill Operator’s Manual . . . . . . . . . . . . . .195-200M
• 2600-2S Drill Parts Manual . . . . . . . . . . . . . . . . . . 195-200P
Definitions
Right-hand and left-hand as used in this manual are determined
by facing the direction the machine will travel while in use unless
otherwise stated.
Assembly Instructions
Box Assembly
Refer to Figure 1
1.
Working on the left-hand side of the drill
remove handle (1) and warning light (6)
from main seed box. Save bolts, nuts,
light and handle for later use.
2. Install the left-hand mount and drive (2)
on the left side of drill frame (3) using a
1/2" x 1 1/4" bolt, 1/2" lock washer and a
1/2" nut supplied in the kit. It will also be
necessary to remove and use the exist-
ing bolt.
3. At holes (4), where the handle was re-
moved, fasten top of the left-hand
mount and drive (2) to main seed box.
Use 1/2" x 1 1/4" bolts and
1/2" locking flange nuts. Leave mount-
ing hardware loose.
4. Install the right-hand mount (8) on the
right side of drill frame using a 1/2" x
1 1/4" bolt, 1/2" lock washer and a 1/2"
nut supplied in the kit. It will also be nec-
essary to remove and use the existing
bolt.
5. At holes (4), where the light was re-
moved, fasten top of the right-hand
mount (8) to main seed box. Use 1/2" x
1 1/4" bolts and 1/2" locking flange nuts.
Leave mounting hardware loose.
6. Bolt small-seeds box (5) to box mounts.
Use 3/8" x 1" bolts, 3/8" lock washers
and 3/8" nuts.
7. Attach the warning light (6) and right-
hand chain guard (7) to the right mount
using bolts removed in step 1.
8. Tighten all hardware.
9. Repeat steps to assemble box on right-
hand drill section, mirroring box
mounts.
17179
When you see this symbol, the subsequent instructions and
warnings are serious - follow without exception. Your life and
the lives of others depend on it!
!!
7/16/2002
Figure 1
Mounting Box