Great Plains TSF1290 Predelivery Manual - Manual (Page 6)

4 TSF1080, TSF1090, TSF1280 and TSF1290
500-641Q 11/08/2006
Practice Safe Maintenance
▲ Understand procedure before doing work. Use
proper tools and equipment. Refer to this manual for
additional information.
▲
Work in a clean, dry area.
▲
Fold the Front Fold Boom Sprayer, put tractor in
park, turn off engine, and remove key before per-
forming maintenance.
▲ Make sure all moving parts have stopped and all
system pressure is relieved.
▲
Allow Front Fold Boom Sprayer to cool completely.
▲
Disconnect battery ground cable (-) before servicing
or adjusting electrical systems or before welding on
Front Fold Boom Sprayer.
▲ Inspect all parts. Make sure parts are in good condi-
tion and installed properly.
▲ Remove buildup of grease, oil or debris.
▲ Remove all tools and unused parts from Front Fold
Boom Sprayer before operation.
Prepare for Emergencies
▲
Be prepared if a fire starts.
▲
Keep a first aid kit and fire extinguisher handy.
▲
Keep emergency numbers for doctor, ambulance,
hospital and fire department near phone.
Tire Safety
Tire changing can be dangerous and should be per-
formed by trained personnel using correct tools and
equipment.
▲
When inflating tires, use a clip-on chuck and exten-
sion hose long enough for you to stand to one side–
not in front of or over tire assembly. Use a safety
cage if available.
▲
When removing and installing wheels, use wheel-
handling equipment adequate for weight involved.
911
OFF