Clarion DSH920S - Manual (Page 9)

DSH920S
9
English
Notes:
• When the name of a channel stored in memory is
changed by a broadcasting station, the display
may show a channel name that differs from the
stored name.
• A channel stored in memory may be discontinued
at the option of the broadcasting station.
Scan function
There are two scan modes: a category scan
mode and a preset scan mode.
During scanning channels are displayed in ab-
breviated form and the display mode cannot be
switched.
● Category scanning
In a category scan, broadcast channels in the
same category as the current channel are se-
lected about every 10 seconds.
1. Press the [SCN] (SC) button to start a cat-
egory scan.
2. Press the [SCN] (SC) button, a [DIRECT]
button, the [ a ] or [ d ] button to cancel a
category scan.
Note:
• Category scanning is not available when no cat-
egory is defined for the current channel.
● Preset scan
A preset scan scans the channels (up to 18
channels) stored in the preset memory about
every 10 seconds.
1. Press and hold the [SCN] (SC) button for 1
second or longer to start a preset scan.
2. Press the [SCN] (SC) button, a [DIRECT]
button, the [ a ] or [ d ] button to cancel a
preset scan.
Sirius operation