Great Plains 3S-4000 Assembly Instructions - Manual (Page 3)

7/24/2006
Great Plains Mfg., Inc.
3 Installation Instructions
25010
Refer to Figure 4
11. Attach elbow fitting (3) located in
port 1 of PO check valve to tee fit-
ting (1) on base end of hydraulic
cylinder.
12. Connect hydraulic hose (2) from
step 10 to adapter (4) located in
port 2 of PO check valve.
Refer to Figure 5
13. Locate hydraulic hose (2) supplied in kit. At-
tach one end of hose (2) to newly installed
tee fitting (1).
14. Attach other end of hose (2) to elbow fitting
(3) located in port 3 of PO check valve.
15. Tighten all fittings.
25011 Figure 5
Attach New Hose
Figure 4
Reroute Hose