Great Plains 3S-4000 Assembly Instructions - Manual (Page 2)

7/24/2006
Great Plains Mfg., Inc.
Hydraulic Fold Cylinder Hold Kit 2
Refer to Figure 2
5.
Locate hydraulic fold cylinder (3) with
tee fitting (2) on the rod end of the
cylinder (3).
6. Disconnect hydraulic hose (1) from
tee fitting (2) on rod end of cylinder
(3).
Refer to Figure 3
7.
Attach tee fitting (3) supplied in kit to
original tee fitting (2) on fold cylinder.
8. Once additional tee fitting (3) is at-
tached, reconnect hydraulic hose (1)
to new tee fitting (3).
9. Locate hydraulic fold cylinder with tee fit-
ting (4) on the base end of the cylinder.
10. Disconnect hydraulic hose (5) from tee fit-
ting (4) on base end of cylinder.
25008
Figure 2
Fold Cylinder Original Plumbing
Figure 3
Install Tee Fitting
25009