Great Plains ST-Bar Operator Manual - Manual (Page 19)

19 Simba ST-Bar
606-037M-ENG
2012-12-21
5.6 Maintenance
Intervals
Apart from daily maintenance, the mainte-
nance intervals are based on the number of
operating hours and time data.
Keep a record of your operating
hours to ensure that the specified
maintenance intervals are adhered
to as closely as possible.
Never use an Simba ST-Bar unit
that is due for maintenance. Ensure
that all deficiencies found during
regular checks are remedied im-
mediately.
On a new machine tighten all nuts and bolts
after 5 hours work and again after 15 hours.
This also applies to parts that have been
moved or replaced. After the initial 15 hours
of work a once a week check should be
sufficient depending on daily work rates.
5.5 Operator Support
If you have a problem, please contact Your
dealer. They will endeavour to solve any
problems which may occur and provide you
with support at all times.
In order to enable your dealer to deal with
problems as quickly as possible, it helps if
you can provide them with the following data.
Always state the
• Customer Number
• Name and Address
• Machine Model
• Serial Number
• Date of Purchase and Operating Hours
• Type of Problem
5. Servicing and Maintenance