Great Plains P16229C Operator Manual - Manual (Page 18)

Hydraulic Reset Flatliner
Operating Instructions
18
4. Adjustment/Operation
1. 3 Point Linkage
2. Tine Arms
3. Rear Roll
4. Hydraulic Control Block
Fig. 4.01: Hydraulic Reset Flatliner
4.1 Description
The Simba Great Plains Hydraulic Reset
Flatliner is a fully mounted 3 or 5 tine V frame
type configuration soil loosener, designed
to operate to maximum depth of 300mm
(12 inches). The 20mm thick high tensile
steel tine shanks are fitted with replaceable
cast sub surface wearing points and wings
specially designed to keep draught to a
minimum and penetration to maximum.
A Double Disc rear roll is fitted to all models
for use both to reduce and consolidate soil
and to control the working depth of machine.
4
1
3
2
4. Adjustment / Operation