Great Plains P13937 - Manual (Page 10)

Series 1 Toolbar
Operating Instructions
10
1.5 Changing Equipment
• Use suitable supports to secure any raised
frame sections suspended above you!
• Caution! Risk of injury due to projecting parts!
1.6 During Operation
The person in charge must:
• provide the operator with a copy of the
Operating Instructions.
• ensure that the operator has read and
understood the instructions.
1.7 Servicing &
Maintenance
Ensure that regular checks and inspections
are always carried out within the periods
required by law or specified in these
Operating Instructions.
Prior to performing maintenance and
servicing work, ensure that the machine is
positioned on solid, level ground and is secure
and stable.
Before cleaning the unit with water, steam jets
(high-pressure cleaning apparatus) or other
cleaning agents, cover all openings into
which, for reasons of safety or operation, no
water, steam or cleaning agents are to
penetrate.
When carrying out servicing and maintenance
work, retighten any loose screw connections.
1.3 Operational Safety
All protective and safety equipment, such as
removable protective equipment, must be in
place and functioning reliably before the
machine is put in use.
Check screws and bolts regularly for
tightness and retighten if necessary.
In the event of malfunctions, stop and
secure the machine immediately.
Ensure that any faults are remedied
immediately.
1.4 No Liability for
Consequential Damage
The Series 1 Toolbar has been manufactured
by SIMBA with great care. However,
problems may still occur when it is used for
the intended purpose. This may include:
• Worn wearing parts.
• Damage caused by external factors.
• Incorrect driving speeds.
• Incorrect setting of the unit (incorrect
attachment, non-adherence to the Setting
instructions).
Therefore, it is crucial to always
check your Toolbar unit before and
during operation for correct
operation and adequate application
accuracy.
Compensation claims for damage which has
not occurred to the component is excluded.
This includes any consequential damage
resulting from incorrect operation.
Safety Data