Great Plains 2000 Parts Manual - Manual (Page 13)

Revision Comments Part Description Part No. Ref.
Image No. dwg18784
2nd rev. (S/N 7042B+) Single gauge wheels. SPNDL 2 X 15 W/ 1.5-12 THD 120-321D 1.
2nd rev. (S/N 7042B+) WASHER HARD 1 1/2 MILCARB GR8 804-182C 2.
2nd rev. (S/N 7042B+) NUT HEX SLOTTED 1 1/2-12 PLT 803-239C 3.
AXLE SPACER TUBE 120-198D 4.
2nd rev. SEAL DBL LIP 2.5 ID X 3.881 OD 816-138C 5.
Use existing stock; 1st rev. RPBY 816-138C 816-171C 5.
BRG CONE 2.00ID TIM33889 822-117C 6.
BRG CUP 3.75OD TIM33821 822-118C 7.
2nd rev. SEAL 3.375 X 2.0 X.438 CR20125 816-012C 8.
Use existing stock; 1st rev. RPBY 816-012C 816-172C 8.
NUT HEX JAM 5/8-11 PLT 803-023C 9.
SCREW SQ HD 5/8-11X3 1/2 GR5 801-059C 10.
G.W. ARM EXTENDED CHAIN GUARD 120-230D 11.
GAUGE WHEEL ARM CHAIN GUARD 120-197D 12.
GAUGE WHEEL ARM 120-208H 13.
HHCS 1/4-20X3/4 GR5 802-004C 14.
WASHER LOCK SPRING 1/4 PLT 804-006C 15.
WASHER FLAT 1/4 SAE PLT 804-007C 16.
PIN SPIROL 1/2 X 2 3/4 805-098C 17.
HUB STUD 1/2-20X1 5/8 GR5 802-135C 18.
HUB 6-BOLT 2 BORE 4.62 PILOT 120-195D 19.
2nd rev. (S/N 7042B+) Dual gauge wheels. 204-064KX 20.53 W/ 1.5-12 THD 120-322D 20.
PIN COTTER 3/8 X 3 PLT 805-148C 21.
1st rev. (S/N 7041B-) Single gauge wheels. RPBY 120-314A 120-224D 22.
1st rev. (S/N 7041B-) WASHER BRG LOCK, TW110 804-098C 23.
1st rev. (S/N 7041B-) NUT BRG LOCK, TN-10 803-208C 24.
1st rev. (S/N 7041B-) Dual gauge wheels. RPBY 120-315A 120-192D 25.
09/25/13 - 13 - 118-389P
Table of Contents Part Number Index
Gauge Wheels
2000 Drive Gauge Wheel Arm
(Applies to 2000 (1994+) only)