Cary Audio Design CAD 300 SEI - Manual (Page 7)

SPECIFICATIONS
This section describes the basic specifications of the CAD 300 SEI at the time of printing. Specifications
are subject to change without notice or obligation. When the following cautionary terms are used in this
manual, these definitions apply:
WARNING
 Electrical hazard! Misuse or failure to follow instructions properly may
result in personal injury or death!
CAUTION
 No risk or personal injury; however, misuse or failure to follow instructions
may result in damage to equipment.
NOTE
 No risk of personal injury or equipment damage; however, misuse or failure
to follow instructions may prevent proper performance of the equipment.
............................................................................................................................................................
CIRCUIT TYPE Single-ended, Class A
............................................................................................................................................................
INPUTS
CD, AUX 1, AUX2
............................................................................................................................................................
POWER OUTPUT
4/8 ohms = 15 watts/CH
............................................................................................................................................................
S/N
90dB below rated power output
............................................................................................................................................................
FREQUENCY RESPONSE
23 – 20,000 Hz (+0 – 0.75dB)
............................................................................................................................................................
HEADPHONE OUTPUT 4-50 ohm compatible ¼” 3 circuit jack
............................................................................................................................................................
POWER TRANSFORMERS 1 - EI laminated, 200% duty cycle
............................................................................................................................................................
OUTPUT TRANSFORMERS
200% duty cycle
Air gapped, wound with OFC copper wire, wax impregnated
............................................................................................................................................................
RESISTORS 1% metal film
............................................................................................................................................................
WIRE
Silver double “E” teflon
............................................................................................................................................................
COUPLING CAPS
Oil filled
............................................................................................................................................................
POWER SUPPLY CAPACITORS
2 – 1200mfd @ 450 VDC, Total – 2400 MFD – 230 Joules
............................................................................................................................................................
WIRING
Point - to - point
............................................................................................................................................................
LINE INPUT 3 switchable selections
............................................................................................................................................................
SPEAKER POSTS 5-way Copper
............................................................................................................................................................
TUBE SOCKETS
Ceramic with silver pins
............................................................................................................................................................
ADDITIONAL FEATURES
Soft shoe feet
Detachable power cord
6