Connecting the beamforming microphone array – ClearOne Beamforming Microphone Array Quick Star User Manual

Page 9

Text mode
Original mode

QUICK-START GUIDE

CONNECTING THE
BEAMFORMING MICROPHONE ARRAY

Connect the Beamforming Microphone Array units to the CONVERGE
Pro via the E-bus connections using CAT5-24AWG solid conductor RJ45
cables. Power can be through a standard Power-over-Ethernet switch or
through an external PoE power supply.

NOTE: The PoE connection is only for power, not control. Power must
be for individual units; no daisy-chain power is allowed. Firmware
upgrades, etc. are performed via the E-bus connection.

Set each additional Beamforming Microphone Array unit to a unique ID
using the Device ID selector rotary switch on the back of the unit. (Range
0-F)