ClearOne Beamforming Microphone Array Quick Star - Manual (Page 3)

QUICK-START GUIDE
1
THE BEAMFORMING MICROPHONE ARRAY
The Beamforming Microphone Array is 24-microphone device with
beamforming and adaptive steering technology designed specifically
for the with CONVERGE® Pro products: 880, 840T, 880T, 880TA.
The Beamforming Microphone Array connects with the CONVERGE
Pro through an Expansion Bus (E-bus) port: 3 arrays per supported
CONVERGE Pro and up to 16 Beamforming Microphone Arrays can be
daisy-chained in the site. The Power for the Beamforming Microphone
Array is supplied through a Power-Over-Ethernet (PoE) connection.
The Beamforming Microphone Array is supported for use as a ceiling-
mounted, wall-mounted or tabletop assembly.
IMPORTANT: The Beamforming Microphone Array only can
be used with CONVERGE Pro systems operating at version 4.X
software and firmware.
The latest version of the CONVERGE Pro firmware can be found on the
ClearOne website at:
http://www.clearone.com/resources#professional_audio
The latest version of the Beamforming Microphone Array firmware and
the Beamforming Microphone Array Installation Guide can be found on
the ClearOne website at:
http://www.clearone.com/resources#professional_microphones