ClearOne Titan Articulating Arm Dual Media Cart User Manual
Page 8
Page 8
Step 7
1.
Fully extend the arms to a position that allows for easy installation of the TVs. Lift the TV (with the attached mounting
hardware from step 6) onto the Articulating Arm. Make sure the Reinforcing Plate fits snug against the Articulating Arm
assembly with the weight supported by the TV Support Cleat on the articulating arm.
2.
Secure the TV to the Articulating Arm with the screw (L) placed through the hole near the bottom of the TV Support Cleat.
Then place the lock plate, spacer (D), and the lock knob (E) over the bolt at the top of the cleat on the articulating Arm,
then tighten. Note that there is a small amount of left-right tilt that can be brought level and set with the locking knob.
NOTE: This operation requires the assistance of another person to lift and hold the TV into place as the
attachments are made.
TV Support Cleat
3.
Repeat this procedure for the remaining TV and Articulating Arm.
L
E
D
Lock
Plate