Cyclades AlterPath Manager 5000 - Manual (Page 8)

AlterPath Manager E2000, 2500, 5000 Quick Start Guide
Cyclades Corporation
3541 Gateway Boulevard
Fremont, CA 94538 USA
1.888.CYCLADES (292.5233)
1.510.771.6100
1.510.771.6200 (fax)
http://www.cyclades.com
Part Number: PAC0381
Release Date: April 2006
Note: In the following example, user input is shown in bold type.:
The default configuration will not take effect until you reboot the APM.
4. Connecting to the Web Management Interface (WMI)
Your configuration will now allow you to connect to the Web Management Interface.
T To Connect to the APM Web Management Interface
1. Open a web browser, such as Internet Explorer.
2. In your browser’s URL entry field, enter the primary or secondary URL that you assigned to
your APM.
Note: You can either use a non-encrypted version of the URL as follows:
http://nnn.nnn.nnn.nnn
or you can use the encrypted version as follows:
https://nnn.nnn.nnn.nnn
Where: nnn.nnn.nnn.nnn is either the primary or secondary IP address that you assigned to the
APM during the First Time Configuration session.
3. When the Login screen appears, log in to the APM as admin. Use the password that you
assigned to admin during the First Time Configuration session.
[root@APM_gregg root]# defconf
WARNING: this will erase all of your current configuration and restore the
system's factory default configuration. This action is irreversible!
Are you sure you wish to continue? (y/N) y
Restoring default configuration ... done.
The new configuration will take effect after the next boot.
[root@APM-gregg root]#