Cyclades AlterPath Manager 5000 - Manual (Page 5)

3. Running the First Time Configuration Wizard
5
.
Figure 8: Private Network Setup
3. Running the First Time Configuration Wizard
The First Time Configuration Wizard includes parameters such as root and admin passwords,
network configuration parameters, and time and date.You need to run the First Time Configuration
Wizard from a serial terminal (or terminal emulator such as Hyper Terminal) connected to the
serial console port on the AlterPath Manager.
T To Run the First Time Configuration Wizard
1. Before you power on the AlterPath Manager, connect one end of a DB-9 to DB-9 Null Modem
cable (or equivalent) to the console port of the AlterPath Manager.
2. Connect the other end of the cable to a terminal or computer’s serial port.
3. Using the terminal or a terminal emulation program installed on a computer, start a session
with the following settings:
• 9600 BPS
• 8 data bits