Cobra Electronics Mrf 80b - Manual (Page 73)

70 English
Product Features
Introduction
Digital Select Calling (DSC)
Operation
Receiving an Individual Call
When another station makes an Individual call to the radio:
■ The Individual alarm sounds.
■ The caller is identified on the LCD.
■ The radio switches to the channel selected by the caller.
■ Call information is placed in the Call Log.
To Receive an Individual Call:
Press the Talk button and greet the caller.
Sending a Group Call
Sending a Group call is like sending an Individual call, but
the group MMSI information is used and the resend and
DSC responses do not apply. See pg. 61 for creating and
entering a group MMSI.
To Send a Group Call:
1. In Standby mode, press the Call/Setup button to enter
the Group call menu.
2. Turn the Channel knob or press the microphone channel
UP/DOWN buttons to scroll to Group.
3. Press the Enter button to move to the channel select
menu.
4. Turn the Channel knob or press the microphone channel
UP/DOWN buttons to select a channel to communicate
the call.
5. Press the Enter button to send the message.
■ All radios switch to the channel selected in step 1.
Press and hold the Talk button to send a voice message
to everyone in the group.
■ Anyone in the group can transmit on the channel.
Operating Your Radio
Caller Identified
Group Calling
Send/Exit
8187-F80-Operation-8_MMB:F75-Operation-8 12/29/06 9:04 AM Page 70