Vermont Casting 2479 User Manual
Page 14
14
Dutchwest Non-Catalytic Convection Heater
30002291
Distance from Center of Flue Collar to Wall in Top-Exit Installations
Dutchwest Convection Heater Model 2479
NOTE: These are not clearance distances. These measurements indicate where the centerline of the flue col-
lar will be for various installations. Measurements are from the centerline of the flue collar to the wall, not the
wall protector.
ST427
dutchwest
flue centerline
6/30/00 djt
A
B
C
E
D
F
C
F
Chimney Connector
Side
Rear
Corner
Side
Rear
Corner
Listed, Approved
(A) 34¹⁄₂”
(B) 12¹⁄₂”
(C) 21”
(D) 22¹⁄₂”
(E) 12”
(F) 20¹₂”
Double-wall, with
(846 mm)
(318 mm)
(533 mm)
(572 mm)
(305 mm)
(521 mm)
flue collar shield
Single wall, with
(A) 29¹⁄₂”
(B) 12¹⁄₂”
(C) 21”
(D) 22¹⁄₂”
(E) 9¹⁄₂”
(F) 18¹⁄₂”
Connector heat shields
(749 mm)
(318 mm)
(533 mm)
(572 mm)
(241 mm)
(570 mm)
and flue collar shield
Single wall with no
(A) 35¹⁄₂”
(B) 23¹⁄₂”
(C) 30”
(D) 22¹⁄₂”
(E) 17¹⁄₂”
(F) 25”
heat shields
(902 mm)
(967 mm)
(762 mm)
(572 mm)
(445 mm)
(635 mm)
UNPROTECTED SURFACES
PROTECTED SURFACES
Corner
Corner
Parallel Installations
Installations Parallel Installations
Installations
ST427