ORBIT FR SATIMO - ORBIT, FR (SOI) interface - Manual

62
Additional SATIMO - ORBIT/FR
Interface
>
The standard SOI interface allows for precise and easy positioning of any SATIMO standard antenna
with a 60 mm or 110 mm fl ange onto an ORBIT/FR measurement system. The interface consists of two
parallel fl anges (SATIMO fl ange and ORBIT/FR fl ange) aligned by three precision rods. The assembly
is also equipped with a bubble level. The SATIMO circular interface allows the user to center the an-
tenna with very high accuracy. Antennas with the 60 mm fl ange are fastened by four M4 screws while
antennas with the 110 mm fl ange are fastened by four M5 screws. The alignment is determined by a
precision pin.
SOI 200 + SH antenna SOI 200 + QH antenna SOI 200 + SGH antenna SOI 200 + OEW antenna