Crosley CFW-8000GS - Manual (Page 25)

25
10. SPEED-WASH PROGRAM
1
2
3
4
Put the laundry into the Drum and put the detergent and softerner into the detergent
case.
Then close the Door.
• Put the detergent into the main wash room(I I marking) in the detergent case.
• Liquid detergent, Softner and Bleach should be below ‘MAX’ level.
Press the Power button.
• The LED shows only ‘- --’ signal.
Select the ‘Speed-wash’ program using the program selection dial.
• If you press ‘Start/Pause’ button aftrer pressing Power button without selecting
program, the ‘Cotton’ program is selected as default program.
• ‘Cold/Cold’ water temperature and ‘Light’ soil level and ‘Main Wash’ and ‘1’ times
rinse and ‘Low’ spin speed are selected automatically.
• If you want to change the 'Wash/Rinse Water Temperature' and 'Spin Speed' and 'Soil
Level' and 'Beeper', select program what you want to change by pressing each button.
Press the ‘Start/Pause’ button.
• The washer will be operated with locking Door and supplying water.
Note
• The appropriate amount of laundry is below 3 kg.
• If you want to change the setting program during operation, press the ‘Start/Pause’ button to hold the
operation and change the program you want to change by pressing each corresponding button.
• The water temperature 'Cold/Cold'~'Warm/Warm' are only selectable.
The spin speed 'No Spin'~'Medium' are only selectable.