beautypg.com

Technical specifications – Crate Amplifiers PM82S User Manual

Page 12

background image

www.crateaudio.com

©2004 SLM Electronics, Inc. • A Division of St. Louis Music, Inc.

1400 Ferguson Avenue • St. Louis, MO 63133

18-681-02 • 101304

PM62S/PM82S/PM82T Powered Mixers

Technical Specifications

Due to ongoing product development and improvement, the specifications contained herein are subject to change without notice.

MAXIMUM VOLTAGE GAIN

87dB Mic In to Power Amp Out Main 1, 2 and Monitor

(PAD OFF)

59dB Mic In to Main Out, Monitor Out

64dB Mic In to Effect Out

47dB Mic In to Rec Out

47dB Line In to Main Out, Monitor Out

26dB Aux In to Main Out, Left (Mono), Right

17dB Stereo Left/Mono to Main

INPUT CHANNEL EQUALIZATION

±15dB Maximum

High: 12kHz (shelving); Mid: 2kHz (peaking); Low: 80Hz (shelving)

FREQUENCY RESPONSE

+1/-3dB, 20Hz-20kHz @ 1W output into 8 ohms (Power Amp Out)

+1/-3dB, 20Hz-20kHz @ +4dB output into 10k ohms (Main Out, Monitor Out, Effects Send)

MAXIMUM OUTPUT POWER

PM62S, PM82S: 2 X 400W/4 ohms @ 0.5% THD @ 1kHz

PM82T: 3 X 270W/4 ohms @ 0.5% THD @ 1kHz

TOTAL HARMONIC DISTORTION

<0.3% @ 20Hz-20kHz, 100W output into 4 ohms (Power Amp Out)

<0.3% @ 20Hz-20kHz, +14dB output into 10k ohms (Main Out, Monitor Out, Effects Send)

HUM AND NOISE

-115dB equivalent input noise, -53dBv residual output noise

(Average, Rs=150

)

(Power Amp Out)

(with 20Hz-20kHz BPF)

-74dBv residual output noise (Main Out, Monitor Out, Effects Send)

-71dBv (75dB S/N) (Main Out, Monitor Out)

All channel Level controls at minimum

-67dBv (72dB S/N) (Main Out, Monitor Out)

One channel Level control at maximum

-73dBv (77dB S/N) Effects Send

All channel Level controls at minimum

-62dBv (66dB S/N) Effects Send

One channel Level control at maximum

CHANNEL CROSSTALK @ 1kHz

< -90dB

GRAPHIC EQUALIZER

+/-12dB @ 60Hz, 120Hz, 360Hz, 1kHz, 2.5kHz, 7kHz, 16kHz

INTERNAL DIGITAL EFFECT

16 programs

PHANTOM POWER

+48V is supplied to electrically balanced inputs for powering condenser microphones via 6.8k

current

limiting/isolating resistors

LIMITER LED ON

Output Level: +34dBv

FOOT SWITCH

DSP On/Off

POWER CONSUMPTION

1500W

SIZE AND WEIGHT

PM62S: 19” (483mm) W x 13” (330mm) H x 11” (279mm) D; 49 lbs (22kg)

PM82S: 21.25” (540mm) W x 13” (330mm) H x 11” (279mm) D; 51 lbs (23kg)

PM82T: 21.25” (540mm) W x 13” (330mm) H x 11” (279mm) D; 52 lbs (24kg)

This manual is related to the following products: