ZPC 35604SSDMV - Manual (Page 5)

5
IS35690-I
Measure 65 in. above the front of the tub
ledge, make a mark on the wall.
For 60 in. tub openings:
Using a level, make a mark on the wall.
For 72 in. tub openings:
Using a level, make a mark 2 in. in (toward
the tub).
Using a level, lightly draw a 4 in. vertical line
down from the mark on the wall.
Repeat this step for the other end of the tub.
NOTE: If the tub opening differs from the
above options, refer to the chart in
TROUBLESHOOTING.
2a.
2a
65 in.
For 72 in. tub
openings
For 60 in.
tub openings
2b
2 in.
2b.
65 in.