ZPC 35604SSDMV User Manual
Page 4
4
IS35690-I
PREPARATION
Before cutting, drilling or hammering into any wall surface, verify the location of electrical, plumb-
ing and gas lines. Cutting any of these may cause serious injury. If needed, contact your electri-
cian, plumber or service person.
Two people are recommended for a safe, easy installation.
WARNING
Before beginning assembly of the product, make sure all parts are present. Compare parts with
package contents list and hardware contents above. If any part is missing or damaged, do not
attempt to assemble the product.
Please read and understand this entire manual before attempting to assemble, operate or install
the product.
SAFETY INFORMATION
Estimated Assembly Time: 30 minutes (with recommended two-person installation)
Tools Required for Assembly (not included): Drill and Bit, Phillips Screwdriver, Hammer and Level
NOTE: Use a 9/32 in. drill bit for drywall anchor installation. Use a 5/32 in. drill bit for direct stud
installation. If installing into a different mounting surface, consult a professional for
proper installation.
ASSEMBLY INSTRUCTIONS
Measure the tub opening.
1
1.