Winchester Repeating Arms 9410 Cross Bolt Safety (Historic Manual) - Manual (Page 9)

9
A MMUNITION
Your Winchester Model 9410 is designed to shoot modern
factory shotgun shells only. It is chambered in .410 bore
with a 2
1 ⁄ 2 " chamber length.
The gauge of your new Model 9410 is inscribed on the
barrel near the receiver. Use only ammunition for which
your Model 9410 is chambered — as indicated on the
barrel — to prevent excessive pressure and possible serious
injury. Please observe these important specifications and
restrictions regarding your new Model 9410 shotgun.
• Factory .410 bore shotgun shells only.
• Chambered for 2 1 ⁄ 2 " shells only.
• Never attempt to load 3" shells.
• Barrel has a smooth bore with no rifling.
• Shoots full choke patterns with bird shot.
• Designed to shoot all factory
2 1 ⁄ 2 " field and target loads.
2 1 ⁄ 2 " Foster-type (rifled) slugs.
2 1 ⁄ 2 " buckshot loads.
(Continued on page 12)
Manual
hammer
stop
Pushed to
left:
off safe
Pushed to
right:
“on safe”
Rebounding
hammer Finger Lever
Trigger Guard
Trigger
Rebounding
hammer
Manual hammer stop
Trigger stop
FIGURE 1B FIGURE 1C
02-018_9410_Ownersmanual 8/14/02 11:23 AM Page 9