Wi Digital Systems Wi-AudioStream User Guide - Manual (Page 23)

3. Route the audio cable beneath the belt clip as shown to prevent
accidental disconnection of cable.
4. Connect the 1/4” male end of the cable to the inputs of your
amplifier, powered monitor, sound system, mixer or foot pedal.
If you’re using the Wi AudioStream receiver in stereo,
use both the L/ MONO and R jacks on your
effects foot pedal, or use the L and R inputs
for your sound system, sampler, mixer or
hard disk recorder.
RECEIVER CONNECTION
Wi AudioStream
23
POWER
LINK/V oIP
Audio Input
Belt Clip
Audio Cable