Receiver features – Wi Digital Systems Wi-AudioStream User Guide User Manual
Page 15
z
Link/VoIP:
This multifunction button performs the Pairing and VoIP MIC activation.
The VoIP function is covered in the VoIP Microphone section on page 17.
The Pairing function allows the receiver to be discovered by the transmitter
Press and hold the
Link button for 3 seconds until the Green LED display fast
flashes.
F
Please refer to the “Rx Button Function Matrix” section of this manual for detailed instructions
{
Next Track:
The Next Track function button is used with the optional Jangus Music PC/MAC
USB transmitter to remotely control jumping to the next track for media players or
sequencing software.
Press the Next Track button once to jump to the next audio track.
RECEIVER FEATURES
Wi AudioStream
15