Waring FP40C - Manual (Page 9)

Batch Bowl Assembly continued…….
• Place the cover on the bowl, with the feed tube on the left, slightly toward the front. The locking tabs on
the cover should be at the left of the locking tabs on the front rim of the work bowl.
• Rotate the cover counterclockwise to lock it into place. When the cover is rotated into place, the safety
interlock tab on the back rim of the cover will deactivate the safety interlock mechanism located in the
safety interlock tower.
• The cover must be in place correctly, with the cover’s safety interlock tab firmly engaged with the
tower’s magnetic safety interlock mechanism, for the food processor to operate. This is an important
safety feature.
NEVER ATTEMPT TO START THE FOOD PROCESSOR
WITHOUT THE COVER LOCKED INTO POSITION.
Two Pushers for Feed Tube
Pick up the large food pusher and the small food pusher. The large
pusher is for processing larger vegetables. The smaller
pusher nests in the larger pusher and can be used for smaller
vegetables, guiding long thin vegetables for more precise cuts
or for jobs like slicing pepperoni.
Large Pusher
Insert the small food pusher into the large food pusher opening.
When it is fully inserted, rotate the small pusher clockwise to lock it
into place. Now you are ready to insert the large pusher into the feed
tube opening. Drop the pusher into the feed tube gently.
Small Pusher
To use the small pusher, rotate it counterclockwise to disengage the
locking feature. Now you can lift the small pusher up and out of the
large pusher. When using the small pusher, the large pusher now
becomes the feed tube for the small pusher.
9