Walker's Game Ear Custom Ear - Manual

OWNER’S MANUAL
Custom Units
Inserting Custom Unit
Inserting your custom unit for the first time can be challenging. Until your device is fully
inserted there can be feedback (whistle). It is recommended that you practice without the
battery until you have perfected this procedure.
Battery Insertion
The Custom Unit is designed to use a size #13 or #312 battery. A zinc air type battery is
recommended, but any type or brand may be used.
• To insert, remove adhesive sticker. Any moisture on the battery surface should be wiped
off prior to insertion. Open the battery door and insert the battery.
• To remove the battery, open the battery door and lift the battery out of the battery door.
Low Battery Indicator: When your battery voltage is low and in need of replacement you
will hear the low battery indicator. You will hear five beeps indicating that it is time to
change your battery. The warning beeps will be repeated.
Helpful Hint: It is recommended that you leave your battery door open when not using
your instruments. This will prolong the life of your batteries.
Caution: Keep batteries out of reach of children or anyone who may accidentally swallow
them. Never put batteries in your mouth for any reason. Do not store batteries in
medication containers or where they may possible by mistaken for medication and
accidentally swallowed. Never attempt to recharge non-rechargeable batteries.
To insert your Full Shell Unit
To insert your Canal Unit
To insert your Micro-Canal Unit
1. Hold the unit between
your thumb and forefinger
with the battery door
facing away from your ear.
1. Hold the unit between your
thumb and forefinger with the
battery door facing away from
your ear.
1. Hold the unit with your
thumb and forefinger with
the program button on top.
2. Gently insert the canal
portion of the unit into your
ear, rotating it slightly, to
ensure proper placement. Be
sure that the device is seated
in the ear properly and
comfortably.
2. Gently insert the canal portion of
the unit into your ear, rotating it
slightly, to ensure proper
placement. Be sure that the
device is seated in the ear
properly and comfortably.
2. Gently insert the unit into your
ear canal. Never force the unit
beyond a comfortable position.
On/Off and Volume Adjustment for Full Shell and Canal Units
On & Off: The unit is turned on and off by either opening/closing the
battery compartment or by turning the volume control past the lowest
setting.
Volume Adjustment: The volume level of the unit can be adjusted by
turning the volume control clockwise to increase the volume and counter-
clockwise to reduce the volume. The unit will beep indicating the volume
level is in the middle.
• 6 Channel Digital Circuitry
• 16 Band Graphic Equalizer
• 4 Programs
• Custom Fit
Full Shell Canal Micro-Canal
Micro-Canal
Program
Button
Battery
Compartment
Microphone
Vent
Full Shell
Battery
Compartment
Vent
Microphone
Volume
Control
Program
Button
Canal
Program Button
Battery
Compartment
Microphone
Volume
Control
Vent
Cleaning Custom Units
It is very important to keep the device as clean as possible. Wax buildup is the number one cause
of instrument failure. In order to keep it working properly it is important that you clean your
device daily.
Wipe your device clean with a soft, dry cloth, carefully removing any traces of wax and debris. A
cleaning tool is provided to assist you in cleaning the vent in your device.
Wax Protection
Wax protection systems are used to accumulate wax and debris before it reaches the
components of your device; using this system in your Custom Unit makes wax
accumulation easier to clean and can prevent damage to the internal components of
your device.
Sound Port Wax Stop and Wax Stop Tool
Tip of Wax Stop Tool
Stop Tool has a positive and a negative tip. The
negative tip has a raised dot above it. The Wax Stop
is inserted into the sound port of the device.
Negative
Tip
Positive
Tip
On/Off and Volume Adjustment for Micro-Canal Unit
On & Off: The unit is turned on and off by opening/closing the battery compartment door.
Volume Adjustment: The Micro-Canal unit has an automatic volume control that adjusts based
off ambient noise levels.
Vent Plugs