CDA SV451 - Manual (Page 27)

Installation
The appliance can be installed under a worktop or in a wall
unit (open or closed) with the appropriate dimensions for
recessed installation.
Do not use your appliance immediately after moving it from a
cold location, as condensation may cause a malfunction. Wait
approximately 1-2 hours before use.
Centre the oven in the unit so as to ensure a minimum
distance of 10mm between the appliance and the surrounding
unit. The material of the unit supporting the appliance must
be heat resistant (or covered with a heat resistant material).
For greater stability, attach the oven to the unit with two
screws through the holes provided on the side panels.
If the appliance is to be installed under a worktop, ensure the
top rail has been removed to provide free airflow around the
product.
Fig. 14
460
445
45
6
3
544
547
458 458 450
445
45
6
3
544
547
26