CDA SV451 - Manual (Page 15)

Programmes
4 Fan oven programme
The fan oven programme allows you to cook and brown foods just as you would
in a traditional oven. The cooking temperature can be set between 50-250 ˚ in 10 ˚
increments.
Place the food on the shelf on either the first or second height.
Touch
Touch four times so the fan oven programme shows on the display.
The temperature is preset to 200 ˚.
To change the temperature, touch to activate temperature selection, touch or
until the required temperature level shows on display, then touch to confirm the
selection.
To set or adjust the cooking time, touch to activate timer selection so the timer
display shows , touch or until the required time shows on display, then touch
to confirm the timer selection.
To set a delayed programme, touch twice to activate timer selection so the timer
display shows and the time the programme is due to end (current time + cooking
time), touch or until the required time shows on display, then touch to confirm
the timer selection. The timer display will then show planned time for the programme
to end.
To start the programme touch . If a delayed programme is set, the microwave will go
on to standby and will show on the display until the programme starts.
Once the required temperature is reached, the upper bars on the temperature indicator
on the display will stay lit there will be three beeps, a pause, and a further three beeps
to confirm the oven is at the required temperature.
Please note:
On fan oven programmes, use heat resistant dishes, for example pyrex, and protect
your hands when removing dishes after cooking.
Do not defrost food immediately after using the fan oven programme. Wait
approximately ten minutes for the appliance to cool for best results.
It is possible to cook on two levels at once, for example to cook two apple tarts, place
one on the glass drip tray on the first height, and the other on the shelf on the third
height. Ensure that you swap the two dishes halfway through the cooking time for even
results.
14