Creek Audio CD43 mk 2 - Manual (Page 2)

2
CD43 mk2 Compact Disc Player
This CD player is designed to operate on 220-240
Volts 50Hz AC or 110-120 Volts 60 Hz AC.
Normally the equipment is supplied with a mains
lead with a fitted 3 pin plug suitable for the country
it is to be used in. If the plug needs to be
changed, please follow the instructions below.
P L U G FITTING INSTRUCTIONS
The wires in the mains lead are coloured in
accordance with the following code:
Blue - Neutral
Brown - Live
Green / Yellow - Earth
In the UK the wires must be connected to the
terminals in the plug as follows:
Blue - N or Black
Brown - L or Red
Green / Yellow - E or Earth
N O T E
1. If a 13-amp plug is used, in the UK it must be
fitted with a 3 Amp fuse.
2. If a 3-pin plug with earthing contact is used,
the Green/Yellow wire must be connected to
the E terminal.
3. As with all electrical equipment, it is
recommended that the mains plug is
removed from the wall socket when not in
use.
TO ACHIEVE MAXIMUM
PERFORMANCE FROM YOUR CD
P L AYER:
1. Install the equipment in a location which is
relatively free of moisture and dust, and
which is well ventilated.
2. Avoid installing the equipment in a location
exposed to direct sunlight or extreme heat
(such as above a heater or radiator).
3. The equipment may not be able to perform at
its best in an extremely cold or hot
environment. Do not attempt to use below
41oF/5oC or above 95oF/35oC.
4. Always handle discs with clean hands.
Avoid using scratched discs..
5. Keep this manual in a safe place for future
reference.
6. Do not attempt to clean the CD player or CD
discs with chemical solvents, as this may
cause irreparable damage. Use a clean, dry
cloth, or specially designed cleaning
materials for discs.
7. If the CD player malfunctions, do not open
the unit and attempt to repair it yourself.
This is a highly technical product and
requires specialist service - return it to your
dealer.
8. Use batteries (2 x AAA) of the same type in
the remote control handset. The use of odd
or different type cells will affect its
N
L
E
Brown to
Live
Blue to
Neutral
Plug
C O N G R AT U L ATIONS ON YOUR
P U R C H A S E
Y
our new CD43 mk2 Compact Disc Player is designed to provide maximum enjoyment and years of trouble
free service. If this is your first CD player, you will find the compact disc system a major step forward in the
science of audio technology. By employing the most sophisticated digital and optical technologies, the
compact disc not only offers the ultimate in sound reproduction, it also provides operating features which have
never been seen before in audio equipment designed for home, such as fast access to any track on the disc, very
simple programming and armchair control.
Please read this manual thoroughly. It will explain the features and operation of your CD Player and help to
ensure a trouble free installation. Please unpack your CD Player carefully. We recommend that you save the
carton and packing material, as they will be helpful should you ever need to move your unit or return it for service.
Your CD Player is designed to work in a horizontal position and it is important to allow at least two inches of
space behind the unit for adequate ventilation and for the cables. To avoid damage, never place the unit near
SAFETY INFORMATION
UK ONLY: FOR ADDED SAFETY, WHEN CONNECTING
THE AC MAINS LEAD TO A 3 PIN PLUG USE A 3A FUSE
APPROVED BY ASTA TO BS1362 - WITH
ASA MARK