Random / shuffle play, Programmed disc play, Cd43 mk2 – Creek Audio CD43 mk 2 User Manual

Page 12

TO SEARCH QUICKLY FOR A
PARTICULAR POINT O F A
T R A C K

During

P L AY

mode press and hold the

buttons for fast-forward and

fast-back operation.

During

P L AY

mode:

When

button is pressed,

the sound will be muted to about 1/4 of
the normal volume level for the
duration of the fast-forward or fast-
back operation.

During

PAUSE

mode:

Pressing or buttons

will

release the pause mode and the
search will continue normally with a
muted sound.

During the

operation, for the

first few seconds the player will search
slowly through the disc and then switch to
searching fast.

FAST SEARCH

(Remote control only)

Using the remote control only, the fast
search can be enabled by pressing the

FAST

button before pressing the search

buttons.

RANDOM / SHUFFLE PLAY

Use this feature to play tracks on a disc in
a random order.
1. Press the

R A N D O M

button on the front

panel or the

S H U F

button on the

remote handset.

2. Press the

P L AY

button. A track will be

randomly selected and the disc will
start playing.

NOTE:

When the

R A N D O M / S H U F

button is pressed during play, the whole
calendar is displayed and random play

starts at the end of the current track.

PROGRAMMED DISC PLAY

(Remote control only)

This feature allows you to play tracks in your
preferred sequence.
It is not possible to program the CD player
while the disc is playing. Press the

S TO P

button first, then enter a program.

ENTERING A PROGRAM

To program a desired sequence of tracks:

1. Select the first track using the

numeric buttons. Press the

PROG

button

on the remote handset. The

M E M O RY

indicator will illuminate and the track
number will be displayed on the calendar.
The first selected track is now stored in the
memory.

2. Select the next track number using the

or numeric buttons. Press the

P R O G

button again - the second choice is now
stored in the memory.

3. Repeat the steps above until all the desired

tracks are stored in the memory.
The complete programmed sequence is
displayed on the

calendar.

EXAMPLE
To play track 5, track 2 and track 8 in
sequence:

Enter the first choice by selecting track
5 using the

or numeric button.

Press the

P R O G

button to store the

first choice. Track

is now stored.

The time display will toggle between
P: 1 and the playing time of the
selection.

Enter the second choice - track 2 using
the

or numeric button. Press the

P R O G

button to store the second

choice. Track

is also stored.

CD43 mk2

Compact Disc Player