Charging zones, Recharging the energi battery, Routing your cables – TYLT ENERGI+ BACKPACK User Manual
Page 5

06
05
Plug the micro USB charging cable into the ENERGI battery.
Route the other end of the cord to the Battery Recharge Cable Pocket.
Plug into any available USB port to charge.
During charging, the LED capacity lights will indicate charge status.
A SINGLE GREEN LED MEANS THAT CHARGING IS COMPLETE.
The ENERGI battery will fully recharge from empty in 7-8 hours using
a 2 Amp USB charging source.
When recharging the ENERGI battery, devices will start charging once
the ENERGI battery is charged to 50%
>>RECHARGING THE ENERGI BATTERY
1
2
1
2
3
4
6
5
6
Tablet Compartment
Protect Pocket™
Charging Cord Pocket
Main Compartment
Main Compartment
Outside the Backpack
1
2
3
4
5
6
>>ROUTING YOUR CABLES
Pass-through openings allow cable
access to different charging zones.
CHARGING ZONES
5
* Not included
Computer USB*
USB Wall Charger*
USB Car Charger*
2
Large Main Compartment
and Side Charging Pocket
Protect Pocket™
Tablet / iPad compartment
Outside device charging
1
2